The Gryphon Programmer for the 6.0L Ford Power Stroke has raised the bar for the competition! With its sleek, in-cab mounting pod, its not just the best programmer, it's the best looking!  And talk about functionality... this unit does it all!

· Reads and Displays EGTs with the included thermocouple
· Provides in-cab display to monitor vital engine functions
· Ships with a custom designed pod
· Displays and clears Diagnostic Trouble Codes (DTCs)
· Datalogs vital engine information
· Displays Alerts and Records such as RPM, MPH and EGT
· Offers 0-60 and Quarter mile performance tests with the drag
        strip Christmas tree lighting and reaction times
· Calculates 0 - 60 and 1/4 mile performance tests
· Records 5 engine parameters (PIDs) for up to 60 seconds
· Customers report gains of 2-3 mpg in fuel economy
· Simple installation
· Gains of up to 100 HP and 200 Ft./Lbs
· Four power levels
· Adjustable LED backlight color
· Customizable boot-up splash screen
· Customizable tuning options including shift points, shift pressure, speed
         limiter and rev limiter

This programmer comes with three canned calibrations:  a 60hp tune, an 80hp tune, and a 100hp tune; however, it can hold up to four calibrations (a $50 fee will be charge for a fourth file).

In addition, if you have a stock or mildly modified truck, you can replace one, two, or all three canned tunes with the calibrations of your choice:

· STOCK CALIBRATION
· FUEL-SIPPER™
· 25HP HEAVY TOW
· 40HP MODERATE TOW
· 65HP STANDARD TOW
· 80HP PERFORMANCE
· 100HP RACE
· 120HP RACE
· 140HP EXTREME

Other power level combinations are available - just ask!

Heavily modified trucks will require custom tuning at an additional charge of $30 per file.

Heavy Modifications include:  Injectors, Big Oil (dual HPOP), Large Single or Twin Turbos, Power Adders (i.e., nitrous, propane, water/meth injection), and Modified Transmissions.

Heavily modified trucks will require custom tuning at an additional charge of $30 per file.

Heavy Modifications include:  Injectors, Big Oil (dual HPOP), Large Single or Twin Turbos, Power Adders (i.e., nitrous, propane, water/meth injection), and Modified Transmissions.

The Gryphon allows the user to view up to 4 PIDs at one time. There are 10 different PIDs to choose from:

· RPM (Revolutions per Minute) - Engine speed
· MPH (Miles per Hour) - Vehicle Speed
· BST (Boost Pressure) - PSI
· EGT (Exhaust Gas Temp) - Degrees F.
· EOT (Engine Oil Temp) - Degrees F.
· TFT (Transmission Fluid Temp) - Degrees F. (A/T ONLY)
· IAT (Intake Air Temperature) - Degrees F.
· BARO (Barometric Pressure) - PSI
· BAT (Battery Voltage) - Volts
· DTC (Diagnostic Trouble Code Count)

The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level and represent power delivered to the rear wheels of the test truck. Power gains may vary based on vehicle and geographical location.

Level 1: 60 Horsepower - 100 Foot Pounds of Torque
Level 2: 80 Horsepower - 140 Foot Pounds of Torque
Level 3: 100 Horsepower - 200 Foot Pounds of Torque

The Gryphon Programmer is sure to feed you hunger for POWER!